 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SSM3J114TU TOSHIBA Field Effect Transistor Silicon P Channel MOS Type SSM3J114TU High-Speed Switching Applications Power Management Switch Applications * * 1.5 V drive Low on-resistance Ron = 526 m (max) (@ VGS = -1.5 V) 0.650.05 2.10.1 1.70.1 +0.1 0.3 -0.05 3 0.1660.05 Unit: mm Ron = 149 m (max) (@ VGS = -4.0 V) 2.00.1 Ron = 321 m (max) (@ VGS = -1.8 V) Ron = 199 m (max) (@ VGS = -2.5 V) 1 2 Absolute Maximum Ratings (Ta = 25C) Characteristics Drain-Source voltage Gate-Source voltage Drain current DC Pulse Symbol VDS VGSS ID IDP PD (Note 1) PD (Note 2) Tch Tstg Rating -20 8 -1.8 -3.6 800 500 150 -55 ~ 150 Unit V V A 0.70.05 Drain power dissipation Channel temperature Storage temperature mW C C 1. Gate 2. Source 3. Drain UFM JEDEC Using continuously under heavy loads (e.g. the application of JEITA high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the TOSHIBA 2-2U1A reliability significantly even if the operating conditions (i.e. Weight: 6.6 mg (typ.) operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Mounted on ceramic board (25.4 mm x 25.4 mm x 0.8 t, Cu Pad: 645 mm2) Note 2: Mounted on FR4 board (25.4 mm x 25.4 mm x 1.6 t, Cu Pad: 645 mm2) Note: Electrical Characteristics (Ta = 25C) Characteristics Drain-Source breakdown voltage Drain cut-off current Gate leakage current Gate threshold voltage Forward transfer admittance Symbol Test Condition Min -20 -12 -0.3 (Note 3) (Note 3) (Note 3) (Note 3) (Note 3) 1.9 Typ. 3.9 100 133 183 220 331 48 39 19 Max -10 1 -1.0 149 199 321 526 pF pF pF ns m Unit V A A V S V (BR) DSS ID = -1 mA, VGS = 0 V (BR) DSX ID = -1 mA, VGS = +8 V IDSS IGSS Vth Yfs VDS = -20 V, VGS = 0 VGS = 8 V, VDS = 0 VDS = -3 V, ID = -1 mA VDS = -3 V, ID = -0.6 A ID = -0.6 A, VGS = -4.0 V Drain-Source ON-resistance RDS (ON) ID = -0.6 A, VGS = -2.5 V ID = -0.6 A, VGS = -1.8 V ID = -0.1 A, VGS = -1.5 V Input capacitance Output capacitance Reverse transfer capacitance Switching time Turn-on time Ciss Coss Crss ton VDS = -10 V, VGS = 0 f = 1 MHz VDD = -10 V, ID = -0.6 A 1 2007-11-01 SSM3J114TU Turn-off time Characteristics Total gate charge Gate-Source charge Gate-Drain charge Drain-Source forward voltage toff Symbol Qg Qgs Qgd VDSF VGS = 0 ~ -2.5 V, RG = 4.7 Test Condition VDS = -16 V, IDS = -1.2 A, VGS = - 4 V ID = 1.8 A, VGS = 0 (Note 3) Min 18 Typ. 7.7 4.9 2.8 0.8 Max 1.2 V nC Unit Note 3: Pulse test Switching Time Test Circuit (a) Test Circuit OUT IN -2.5 V RG RL VDD 90% (b) VIN 0V 10% 0 -2.5V 10 s (c) VOUT VDS (ON) 90% 10% tr ton toff tf VDD = -10 V RG = 4.7 D.U. < 1% = VIN: tr, tf < 5 ns Common Source Ta = 25 C VDD Marking 3 Equivalent Circuit (top view) 3 JJ7 1 2 1 2 Precaution Vth can be expressed as the voltage between the gate and source when the low operating current value is ID = -1mA for this product. For normal switching operation, VGS (on) requires a higher voltage than Vth and VGS (off) requires a lower voltage than Vth. (The relationship can be established as follows: VGS (off) < Vth < VGS (on).) Be sure to take this into consideration when using the device. Handling Precaution When handling individual devices (which are not yet mounted on a circuit board), ensure that the environment is protected against static electricity. Operators should wear anti-static clothing, and containers and other objects that come into direct contact with devices should be made of anti-static materials. 2 2007-11-01 SSM3J114TU -4 -4 V ID - VDS -10000 -1.8 V -2.5 V -1000 Common Source VDS = -3 V ID - VGS (A) -3 -1.5 V (mA) ID ID -100 Ta = 85 C -10 25 C Drain current Drain current -2 -1 VGS = -1.2 V -1 -25 C -0.1 0 Common Source Ta = 25 C 0 -0.5 -1 -1.5 -2 -0.01 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 Drain - Source voltage VDS (V) Gate - Source voltage VGS (V) RDS (ON) - VGS 450 400 ID = -0.1 A 450 400 Common Source RDS (ON) - VGS ID = -0.6 A Common Source Drain - Source on-resistance RDS (ON) (m) 350 300 250 200 150 Ta = 85 C 100 50 0 0 -2 -4 25 C Drain - Source on-resistance RDS (ON) (m) 350 300 250 200 150 100 50 0 -25 C 0 -2 -4 -6 -8 25 C Ta = 85 C -25 C -6 -8 Gate - Source voltage VGS (V) Gate - Source voltage VGS (V) RDS (ON) - ID 450 Common Source 400 Ta = 25C 500 Common Source RDS (ON) - Ta Drain - Source on-resistance RDS (ON) (m) Drain - Source on-resistance RDS (ON) (m) 350 300 250 200 -1.8 V 150 100 50 0 -2.5 V -4.0 V VGS = -1.5 V 400 ID = -0.1 A / VGS = -1.5 V 300 -0.6 A / -1.8 V -0.6 A / -2.5 V 200 100 -0.6 A / -4.0 V 0 -1 -2 -3 -4 0 -50 0 50 100 150 Drain current ID (A) Ambient temperature Ta (C) 3 2007-11-01 SSM3J114TU Vth - Ta Common Source |Yfs| - ID (S) 30 Common Source 10 3 1 0.3 0.1 VDS = -3 V Ta = 25 C VDS = -3 V ID = -1 mA -0.8 Vth (V) -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 -25 0 25 50 75 Forward transfer admittance Gate threshold voltage Yfs -0.7 0.03 0.01 1 100 125 150 -10 -100 -1000 -10000 Ambient temperature Ta (C) Drain current ID (mA) 5000 3000 C - VDS -10 Dynamic Input Characteristic (V) (pF) C 500 300 Ciss -8 VGS 1000 Gate-Source voltage -6 VDD = -16 V Capacitance 100 50 30 Common Source Ta = 25 C f = 1 MHz VGS = 0 V -1 -10 Coss Crss -4 -2 10 -0.1 Common Source ID = -1.2 A Ta = 25 C 0 5 10 15 20 -100 0 Drain - Source voltage VDS (V) Total gate charge Qg (nC) t - ID 1000 Common Source VDD = -10 V VGS = 0 -2.5 V Ta = 25 C RG = 4.7 -2 Common Source VGS = 0 V Ta = 25 C -1.5 IDR - VDS (A) (ns) toff 100 tf D IDR S t IDR Drain reverse current Switching time G -1 ton 10 tr -0.5 1 0.01 0 0.1 1 10 0 0.2 0.4 0.6 0.8 1 1.2 Drain current ID (A) Drain-Source voltage VDS (V) 4 2007-11-01 SSM3J114TU 1000 PD - Ta a: mounted on FR4 board (25.4mmx25.4mmx1.6mm) Cu Pad :25.4mmx25.4mm b:mounted on ceramic board (25.4mmx25.4mmx0.8mm) Cu Pad :25.4mmx25.4mm b 800 Drain power dissipation PD(mW) 600 a 400 200 0 0 20 40 60 80 100 120 140 160 A mbient temperature Ta(C) Rth - tw 1000 c Transient thermal impedance Rth(C/W) b 100 a Single pulse a:Mounted on ceramic board (25.4mmx25.4mmx0.8mm) Cu Pad :25.4mmx25.4mm b:Mounted on FR4 board (25.4mmx25.4mmx1.6mm) Cu Pad :25.4mmx25.4mm c:Mounted on FR4 Board (25.4mmx25.4mmx1.6mm) Cu Pad :0.45mmx0.8mmx3 10 1 0.001 0.01 0.1 1 10 Pulse width tw (S) 100 1000 5 2007-11-01 SSM3J114TU RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-11-01 |
Price & Availability of SSM3J114TU
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |